Tractor Parts Department in Hempstead, TX

Our parts counter keeps the wear items that break down work first: filters, belts, blades, hydraulic fittings and the small stuff that stops a job cold. Parts are made for a particular machine, so tell the counter the make and model. If a part isn't on the shelf, the counter can order it. Give us a call before you drive over, especially if you need something less common. Tell the counter what you're working on, and it can look into what fits.

Have your tractor's model and serial number ready before you call or send in a request. That's how the counter matches the right part to your machine, especially on hydraulic fittings and filters where one number off means the wrong part shows up. You can list that information on the online request instead of waiting on a callback. Not sure where to find it? Call and ask where it usually sits on your model. The more detail you give up front, the less back-and-forth it takes before your tractor's back to work.

Filters wear first out here. Air filters especially, with the dust off dry fields and gravel roads. Belts and blades go next if you're mowing or working pasture edges. Keep a spare filter and belt at home. That way a dusty afternoon doesn't turn into a trip to town mid-job. Hydraulic hoses and fittings wear slower. But a worn hose can end a day in the field if it lets go. Ask the counter what fits your tractor and what's worth having in the shed. If you're running ground along the Brazos bottoms, you'll wear through filters quicker than most, so it pays to check yours before you head out.

Use the online parts request. List the machine and the part you need on the form. You can also call the store if you'd rather talk it through first. Either way works, for a tractor part or an implement part. If something needs to be ordered, the counter can special-order it, so ask about timing when you check in. Say what the part does and where it sits on the machine. Know the part number? Add it. If not, describe the job the machine was doing when it failed.

Bringing the worn part in can help, especially for belts, blades or small hardware where numbers wear off over time. It's worth the effort. The counter can match it up by sight more easily than guessing from a description alone. If the part's too big to haul in, a photo works for a lot of items — just call ahead and ask what the counter needs to see. For hydraulic fittings, bring the fitting itself if you can. Thread sizes don't always match what a description alone tells you. Either way, the goal is getting you the right part on the first trip, not the third.