Tractor Parts Department in Kountze, TX

Maintenance parts, by a wide margin. That means filters, belts, cutter blades, hydraulic hoses and fittings, and batteries. They're what a working tractor goes through in timber, brush and pasture. The counter also handles special orders when a part isn't on the shelf. So you don't have to guess whether it's there before you ask. Describe the part and the machine it goes on. If you can, bring the old one or send a photo. That gives the counter a lot to go on.

Two of them: the model and the serial number. The model number matters most. Without it, the right part is near impossible to find. Machines that look identical can take different parts. A wrong guess sends you home with the wrong piece, and the counter line waits on the do-over. Find the plate on the frame or near the operator's seat. Take a photo of it while you're there. Then send us a parts request online with those numbers and the part you're after.

Cutter blades and hoses, most of the time. Woody stems chip a blade's edge. Vines wrap around shafts and catch on hoses near the loader and hitch. The air filter loads up with dust and leaf litter. Tires can pick up punctures from cut brush. Out on open pasture, you'll go through filters and belts more than blades. After a hard day in the woods near Kountze, look the tractor over. A hose that's rubbed thin is easier to replace before it lets go.

Yes. The counter handles implement parts as well as tractor parts. Cutter blades, gearbox seals, pins, bushings and box blade shanks are all on the list. An implement's parts belong to that implement. So the counter needs its make, model and width, not only the tractor pulling it. A 4' cutter doesn't take the same blades as a 6'. Look for a decal or plate on the frame and note what it says. Share that, and the counter can track down the right piece.

There is. Put in a request from Kountze, naming the machine and what's worn out or broken. No trip needed just to ask. Prefer a voice on the line? Call the store and ask for the parts counter. Already coming over to Buna? Bring the old part along. Next to the new one, it answers most questions in a glance. A chipped blade or a cracked fitting matches up fast that way. Any of those routes reaches the same counter.