Tractor series / Bad Boy

Bad Boy 40 Series

The Bad Boy 40 Series is the 4035 compact tractor, built as the open-station 4035H or the 4035CH with a cab. They're rated at 35 engine hp and 29.5 PTO hp, with a three-range hydrostatic transmission and selectable four-wheel drive. At J5 Tractors, our Bryan store sells both versions of the 4035.

Call Bryan: (817) 767-1150

Bad Boy 4035 cab tractor with a front loader bucket — Photo: Bad Boy Mowers

At a glance

compact · 2 models: 4035H and 4035CH

Engine horsepower: 35 hp
PTO horsepower: 29.5 hp
Loader lift capacity: 2,200 lbs
3-point lift capacity: 2,425 lbs
Transmission: HST, 3-range
3-point hitch category: Cat 1
Drive: Selectable 4WD

Sold at Bryan. Best for heavier loader work, shredding pasture, working from a cab.

Call Bryan for current pricing: (817) 767-1150

Every model, side by side

Specification	4035H	4035CH
Engine
Engine horsepower	35 hp	35 hp
PTO horsepower	29.5 hp	29.5 hp
Cylinders	3	3
Displacement	104.5 cu in	104.5 cu in
Fuel tank	7.1 gal	7.1 gal
Drivetrain
Transmission	HST	HST
Speeds	3-range	3-range
Hydraulics
Hydraulic flow (total)	12.6 gpm	12.6 gpm
3-point hitch	CAT I	CAT I
3-point lift, 24 in. behind	2,425 lb	2,425 lb
Loader
Loader model	BBL400	BBL400
Loader lift height	104 in	104 in
Loader lift, full height	2,200 lb	2,200 lb
Size
Wheelbase	65.7 in	65.7 in
Overall length	134.88 in	134.88 in
Overall width	56.7 in	55.6 in
Ground clearance	13.1 in	13.1 in
Weight	3,164 lb	3,551 lb

All specifications on this page were taken directly from Bad Boy, the manufacturer. Figures from Bad Boy 4035 specifications, checked November 2, 2026: Bad Boy 4035 specifications.

Open station or cab?

Under the sheet metal, the two 4035s are the same tractor. They share a 104.5-cubic-inch engine, 12.6 gpm of hydraulic flow and the BBL400 loader. That loader lifts 2,200 lb at full height and reaches 104 inches. The 3-point lifts 2,425 lb, measured 24 inches back, so choosing the cab doesn't take away any lift out back.

The cab's the difference you'll feel. It adds weight: the 4035CH comes in at 3,551 lb, and the 4035H at 3,164 lb. The cab model's a hair narrower, at 55.6 inches to the open station's 56.7. Both ride on a 65.7-inch wheelbase with 13.1 inches of ground clearance. Both run 134.88 inches long, so there's no difference in the room you'll need to park one.

Both versions run selectable four-wheel drive and the same three-range hydrostatic, so the cab doesn't change how the tractor drives. Each carries 7.1 gallons of fuel. The hitch is CAT I, and that's the size to check against any 3-point implement you already own.

What a 35 hp frame is for

That 29.5 PTO hp is what turns a shredder. So the 4035 is a tractor for cutting pasture, moving dirt and doing loader chores around the barn. Horsepower's only part of it, though. On the 4035, the frame and the loader are sized to go with the engine.

Thinking about clearing land, not just keeping it up? Size for the bigger job. With 2,200 lb of loader lift and 2,425 lb on the 3-point, the 4035 gives you more to work with than a smaller frame.

Cab tractors are in demand with us from November through January, and again in August. If you go with the cab, keep the condenser and radiator blown out. When a cab's A/C stops cooling, a condenser packed with dust and debris is often why. The tractor can't breathe, so the A/C can't cool.

Financing

Financing for the Bad Boy 40 Series starts with our easy online credit application. It works for new and pre-owned machines.

Tractor Financing & Credit

Reach out to our sales team

Carson WakefieldBryan store(817) 767-1150

Store page: Bryan

Questions people ask

What's the difference between the Bad Boy 4035H and 4035CH?

The cab. The 4035CH has one, and the 4035H's an open station. Everything that does the work is shared: 35 hp, 29.5 PTO hp, 2,200 lb of loader lift and 2,425 lb on the 3-point. The cab model weighs 3,551 lb, about 390 lb more than the 4035H.

How much PTO horsepower does the Bad Boy 4035 make?

It's rated at 29.5 PTO hp from a 35 hp engine, and the 4035H and 4035CH share that figure. That's the number to size a rotary cutter or other PTO implement against. Check your implement's PTO requirement against it before you buy, and you won't be left short.

How high does the Bad Boy 4035 loader reach?

The BBL400 loader lifts to 104 inches and carries 2,200 lb at full height. That's the same on the 4035H and the 4035CH. If you'll be loading a trailer or a truck bed, measure its side against those 104 inches before you come see us in Bryan.

How much does a Bad Boy 40 Series tractor cost?

Call our Bryan store for current pricing on the 4035H and 4035CH. Pricing depends on the model and how it's equipped, so the store will price the one you want.

Call Bryan for current pricing: (817) 767-1150